Monthly Archive: October 2019

CONSTRUCTION OF THREE FLYOVER BRIDGES: RIVERS STATE GOVERNMENT,  JULIUS BERGER SIGN AGREEMENT 0

CONSTRUCTION OF THREE FLYOVER BRIDGES: RIVERS STATE GOVERNMENT, JULIUS BERGER SIGN AGREEMENT

Rivers State Government and Julius Berger Nigeria Plc on Friday signed an agreement for the construction of three flyover bridges to develop the landscape of Port Harcourt and resolve traffic congestion in the city. The Attorney-General of Rivers State, Dr Zaccheus Adango led officials of the Rivers State Government during the signing process, while the Managing Director of Julius Berger Nigeria Plc, Dr Lars Richter led the Julius Berger team....

CONDITIONS REQUIRED FOR SUBSURFACE MOISTURE PROTECTION 0

CONDITIONS REQUIRED FOR SUBSURFACE MOISTURE PROTECTION

Author: Donald Baerman In some cases, the subsurface spaces of a building are not critical; valuable goods are not stored there, and the spaces are not used for critical operations. In these instances, occasional leaking may be tolerated, and neither dampproofing nor waterproofing may be needed. Dampproofing is generally adequate to retard passage of water into a basement, and subsurface drainage is provided by natural ground absorption and/or evaporation, under...

HOW TO PROTECT SUBSURFACE MOISTURE 0

HOW TO PROTECT SUBSURFACE MOISTURE

By Donald Baerman In this article, I will be discussing subsurface moisture protection and the effects of groundwater on buildings. Since waterproofing of the subsurface portions of a building is difficult to remedy, the reliability of the waterproofing and moisture control strategies is critical. Methods of moisture control of substructures include: Dampproofing, which retards the passage of water in the absence of hydrostatic pressure. Waterproofing, which prevents the passage of...

RETAINING WALL 0

RETAINING WALL

By Martin D. Gehner/Abasiekeme George Retaining wall is a wall that hold back or retain soil laterally between disparate grade level. Typically, the wall is cantilevered from a footing extending up beyond the grade on one side and retaining a higher level grade on the opposite side. Retaining walls is also known as basement wall. However, they are supported at the lowest end by the basement floor slab and at...

0

HOW TO ASSEMBLE AND FIX REINFORCEMENT

Reinforcing steel for concrete is use in the main to provide resistance to tensile stresses in structural members. The steel reinforcing bars should be placed and secured in the positions inside formwork where they will be most effective in reinforcing concrete that will be poured and compact inside formwork around the reinforcement. It should be rigidly fixed in positions which will not displaced when wet concrete is placed and compacted....

ATACTIC POLYPROPYLENE MEMBRANE FOR BASE SLAB 0

ATACTIC POLYPROPYLENE MEMBRANE FOR BASE SLAB

ATACTIC POLYPROPYLENE (APP) is a modified bitumen polymer which improves the physical property of bitumen. This modified bitumen coating has overcome to a very good extent, to remove the drawback of conventional bitumen membrane of its undesirable temp; related variations like to become brittle at freezing temps and soft at high temps. Since waterproofing cannot be carried out using a single material, i.e. suitable for one structure, may not apt...

CRYSTALLINE WATERPROOFING SYSTEM: ITS APPLICATION AND ADVANTAGES 0

CRYSTALLINE WATERPROOFING SYSTEM: ITS APPLICATION AND ADVANTAGES

In this system, water bearing capillaries are blocked with insoluble crystals, the saturated surface is applied one or two coatings with crystalline waterproofing slurry. In modern construction technology developments, a single product or technique is not usually enough, involvement of various bodies and techniques in co–ordination is essential for making the structure waterproof. Structure should have sufficient and efficient various control joints like expansion joints, contraction joints, etc. if proper...

CONCRETE : REINFORCING BARS 0

CONCRETE : REINFORCING BARS

Deformed bars Deformed bars are used to limit the cracks that may develop in reinforced concrete around mild steel bars, due to the stretching of the bars and some loss of bond under load. It have projecting ribs twisted to improve the bond in concrete. The type of deformed reinforcing bars generally used are ribbed bars that are rolled from mild steel and ribbed along length, ribbed mild steel bars...

HOW TO DETERMINE WHERE TENSILE AND COMPRESSIVE STRESSES OCCUR IN STRUCTURAL MEMBERS OF A BEAM 1

HOW TO DETERMINE WHERE TENSILE AND COMPRESSIVE STRESSES OCCUR IN STRUCTURAL MEMBERS OF A BEAM

It is convenient to consider the behaviour of an elastic material. For instance, the diagram above illustrates Indian Rubber under stress. A bar of rubber laid across and not fixed to two supports bends under load and the top surface shortens and becomes compressed under stress and the bottom surface stretched under tensile stress. A member that is supported so that the support do not restrain bending under load is...

REINFORCEMENT IN CONCRETE 1

REINFORCEMENT IN CONCRETE

Reinforced Concrete Reinforced concrete Is the process of strengthening concrete by embedding steel in concrete which act together in resisting compressive strength of the concrete and tensile strength of the steel. Reinforced concrete is one of the two structural materials used in engineering construction and building works. Concrete is strong in resisting compressive stress but comparatively weak in resisting tensile stress. The tensile strength of concrete is between one tenth...